Takex TXF-125DM – 100m Battery Powered Quad Beam Double Modulation

Secure any site, instantly, with the TXF-125DM Battery Operated Quad Beam Sensor.

Specifications:
Detection System: Near-infrared pulsed beam interruption system (TR-RE, 4-beam simultaneous interruption)
Infrared Beam: Double-modulated pulsed beam using LED (near-infrared light-emitting diode)
Detection Distance: Up to 100 m (330 ft) outdoors
Response Time: 50 ms, 100 ms, 250 ms or 500 ms (4-level adjustment)
Frequency Selection: 4 channels
Supply Voltage: 3.6 V DC
Recommended Battery: SAFT lithium thionyl chloride battery LS33600
Current Consumption: 1,650 μA total. Transmitter: approx. 1,130 μA. Receiver: approx. 520 μA (during protection, at normal temperature and 3.6 V DC).
Battery Life: Transmitter: approx. 3 years (at normal temperature, using 4 recommended batteries, excluding wireless transmitter). Receiver: approx. 3 years (at normal temperature, with 100 detections per day, using 2 recommended batteries, excluding wireless transmitter).
Alarm Output: Contact method: solid-state switch, Form C. Contact capacity: 3.6 V DC, 0.01 A (resistive load).
Environmental Output: Contact method: solid-state switch, Form C. Contact capacity: 3.6 V DC, 0.01 A (resistive load).
Low Battery Output: Contact method: solid-state switch, normally open (N.O.). Contact capacity: 3.6 V DC, 0.01 A (resistive load).
Tamper Output: Contact method: solid-state switch, normally closed (N.C.). Contact capacity: 3.6 V DC, 0.01 A (resistive load).
Power Output: 3.0–3.6 V DC, 65 mA maximum (with 2 new batteries)
LED Indicator: Red LED on receiver illuminates when an alarm is generated or when the beam is attenuated. Active only when the cover is open.
Mounting Position: Indoor and outdoor.